风管制作作业都有哪几个要求？

发布人：   发布时间：2024-06-18 19:07:36

　　1、风管预制应有独立的工作场地，场地应平整、清洁，加工平台应找平。双面铝箔绝热板风管等其它复合材料风管的场地应干燥，应有足够的成品堆放场地；

　　1. The prefabrication of air ducts should have an independent work site, which should be flat and clean, and the processing platform should be leveled. The site for double-sided aluminum foil insulation board air ducts and other composite material air ducts should be dry and have sufficient storage space for finished products;

　　2、作业地点应有安放施工机具和材料堆放场地，设施和电源应有可靠的防护装置。作业场地道路应畅通。必须有能满足消防要求的各种器械及设施；

　　2. The work site should be equipped with construction equipment and material storage areas, and facilities and power sources should have reliable safety protection devices. The roads at the work site should be unobstructed. There must be various instruments and facilities that can meet the fire protection requirements;

　　3、加工设备布置在建筑物内时，应考虑建筑物楼板、梁的承载能力，必要时应采取相应措施；

　　3. When arranging processing equipment inside buildings, the bearing capacity of building floors and beams should be considered, and corresponding measures should be taken if necessary;

　　4、大样图、系统图经审查符合要求，并进行了技术及交底；

　　4. The detailed drawings and system diagrams have been reviewed and meet the requirements, and technical and safety briefings have been conducted;

　　5、对于洁净系统的风管制作应有干净封闭库房储存成品或半成品；

　　5. For the production of air ducts in clean systems, there should be a clean and enclosed warehouse for storing finished or semi-finished products;

　　6、加工场地应预留现场材料、成品以及半成品的运输通道，加工场地的选择不得阻碍消防通道。

　　6. The processing site should reserve transportation channels for on-site materials, finished products, and semi-finished products, and the selection of the processing site should not obstruct fire exits.

　　以上是关于 澳门正版内部资料大公开风管加工厂 的介绍，若想了解相关知识可请点击：我们将会全心全意为您提供满分服务，欢迎您的来电！

　　The above is an introduction to Jinan Wind Pipe Processing Factory. If you want to learn more about related knowledge, please click: We will wholeheartedly provide you with full score service. Welcome to call us!