工业空调的通风管道加工规范及注意事项是什么？

发布人：   发布时间：2022-08-23 15:52:02

在车间通风冷却工程中，空调通风管道的加工和安装是一个非常重要的环节。通风管道的加工和安装方法有一些具体的要求和规范，这是所有个人或企业都应该研究和学习的内容。那么，通风管道的加工规范是什么呢？接下来，小边会给你一个答案，来理解它。

In the workshop ventilation and cooling engineering, the processing and installation of environmental protection air conditioning ventilation duct is a very important link. There are some specific requirements and specifications for the processing and installation methods of ventilation pipes, which should be studied and studied by all individuals or enterprises. Then, what is the processing specification of ventilation duct? Next, Xiaobian will give you an answer to understand it.

通风管加工前的注意事项：

Precautions before ventilation pipe processing:

一：规格。这里提到的规格是通风管道的基本规格，以及我们需要的通风管道的尺寸和尺寸。值得注意的是，在确定规格时，我们需要与空调的使用联系起来。只有这样，我们才能确保通风管道规格设置后，我们才能与空调连接，发挥使用功能，完成其使用效果。

1： Specifications. The specifications mentioned here are the basic specifications of the ventilation duct and the size and size of the ventilation duct we need. It is worth noting that when determining the specification, we need to link it with the use of air conditioners. Only in this way can we ensure that after the specification of the ventilation duct is set, we can connect with the air conditioner, give play to the use function and complete its use effect.

二：类型。通风管有多种类型。不同类型与空调结合使用，效果不同，特别是绝缘通风管。因此，如果我们想进行通风管道加工，让它们更好地结合空调工作，那么我们也应该在加工前考虑它们的类型，这是确保它们运行并发挥优势作用的好条件。

2： Type. There are many types of ventilation pipes. Different types have different effects when combined with air conditioners, especially insulated ventilation pipes. Therefore, if we want to process the ventilation ducts to better integrate them with the air conditioning work, we should also consider their types before processing, which is a good condition to ensure their efficient operation and play an advantageous role.

综上所述，通风管加工前，应与空调的基本情况相结合，并注意通风管的规格和类型。不同的空调需要不同的通风管，不同的规格，不同的类型。因此，在处理通风管时，应考虑上述情况。

To sum up, before processing the ventilation pipe, it should be combined with the basic conditions of the air conditioner, and pay attention to the specification and type of the ventilation pipe. Different air conditioners require different ventilation pipes, different specifications and different types. Therefore, the above situation should be taken into account when handling the vent pipe.

通风管道加工规范：

Ventilation pipe processing specification:

1.通风管道加工时，为保证风管制作后的强度，在下料时应保留20mm铝箔作为保护边缘；

1. During the processing of ventilation duct, in order to ensure the strength of the duct after fabrication, 20mm aluminum foil shall be reserved as the protective edge during blanking;

2.风管应在粘接前预组合，检查拼接缝是否紧密，尺寸是否符合要求。根据季节温度、湿度和粘合剂的性能确定佳粘合时间。粘接后，用角尺检查。钢卷尺。垂直度和对角线偏差的调整应符合规定。

2. The air duct shall be pre assembled before bonding, and check whether the splicing joint is tight and whether the size meets the requirements. Determine the best bonding time according to the seasonal temperature, humidity and adhesive performance. After bonding, check with a square. Steel tape. The adjustment of perpendicularity and diagonal deviation shall meet the requirements.

3.加工通风管时，做好现场板材及预制管的成品保护工作。

3. During the processing of ventilation pipes, the finished products of on-site plates and prefabricated pipes shall be well protected.

4.连接安装后，应检查粘接接头，粘接后应平整，歪斜。错位.局部开裂，2mm以上缝隙等缺陷。

4. After the connection and installation, the bonding joint shall be checked, and the bonding joint shall be flat and skew. Dislocation, local cracks, gaps above 2mm and other defects.

5.风管支吊架间距应符合规定。

5. The spacing of air duct supports and hangers shall meet the requirements.

以上就是为大家介绍的有关澳门正版内部资料大公开风管加工厂的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

The above is the detailed introduction of Jinan air duct processing factory. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude